Difference between revisions of "Download"

From ITEAD Wiki
Jump to: navigation, search
m (→‎Images)
m (→‎ITEAD OS)
 
(21 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
==IBOX / Iteaduino Plus==
+
__TOC__
−
===Tools===
+
 
−
* Win32 Disk Imager
+
==Introduction==
 +
This page serves for the images download. Images in this page all can be installed in the products such as IBox, Iteaduino Plus, ITEAD Core A20. Installing these images, you need some tools to help you burn them into your device. You can find the images installation tutorial in this link. http://blog.iteadstudio.com/ibox-upgrade-guide-phoenixsuit-tool-2/
 +
 
 +
Good luck!
 +
 
 +
{| class="wikitable"
 +
| align="center" style="background:#f0f0f0;"|'''Property'''
 +
| align="center" style="background:#f0f0f0;"|'''Unit'''
 +
| align="center" style="background:#f0f0f0;"|'''Value'''
 +
|-
 +
| Specific Gravity||—||1.91-1.2
 +
|-
 +
| Rockwell Hardness||gk/cm2||M-100
 +
|-
 +
| Shear Strength||gk/cm2||630
 +
|-
 +
| Flexural Strength||gk/cm2||1050
 +
|-
 +
| Tensile Strength||gk/cm2||760
 +
|-
 +
| Compressive Strength||gk/cm2||1260
 +
|-
 +
| Specific Heat||Cal/gr℃||0.35
 +
|-
 +
| Dielectic Strength||Kv/mm||20
 +
|-
 +
| Surface Resistivity||Ohm||1016
 +
|-
 +
| Light Transmittance||%||93
 +
|-
 +
| Refractive Index||—||
 +
|-
 +
| Coefficient of Thermal Conductivity||Cal/xee/cm/℃/cm||
 +
|-
 +
| Hot Foming Temp||℃||140-180
 +
|-
 +
| Hot Deformation Temp||℃||100
 +
|-
 +
| Thermal Expansion Coefficient||Cm/cm/℃||6*10-5
 +
|-
 +
| Water Absorption(24Hrs)||%||0.3
 +
|}
 +
 
 +
==Tools==
 +
===Win32 Disk Imager===
  
 
This program is designed to write a raw disk image to a removable device or backup a removable device to a raw image file. It is very useful for embedded development, namely Arm development projects (Android, Ubuntu on Arm, etc). Anyone is free to branch and modify this program.  
 
This program is designed to write a raw disk image to a removable device or backup a removable device to a raw image file. It is very useful for embedded development, namely Arm development projects (Android, Ubuntu on Arm, etc). Anyone is free to branch and modify this program.  
Line 7: Line 51:
 
You can download from [http://sourceforge.net/projects/win32diskimager/files/latest/download SourceForge]
 
You can download from [http://sourceforge.net/projects/win32diskimager/files/latest/download SourceForge]
  
−
* LiveSuit / PhoenixSuit
+
===LiveSuit / PhoenixSuit===
 
LiveSuit is developed by Allwinner as a installation application for Microsoft Windows/Linux/MAC to flash the NAND for Allwinner chips. For more information, you can refer to http://linux-sunxi.org/LiveSuit
 
LiveSuit is developed by Allwinner as a installation application for Microsoft Windows/Linux/MAC to flash the NAND for Allwinner chips. For more information, you can refer to http://linux-sunxi.org/LiveSuit
  
Line 13: Line 57:
  
  
−
===Images===
+
==Images==
 +
===ITEAD OS===
  
−
*'''<strike>[http://itead.me/ITEADDownload/images/iteados-A20-debian-xfce-2.0.4-2014-05-13.img.bz2 ITEAD OS 2.0.4 for A20 SD Card]</strike>'''
+
'''Note:'''
 +
*'''1. We offer several download links here in case one of them doesn't work for you.'''
 +
*'''2. Default account and password to login system：'''
 +
::'''Admin: <font color="#FF0000">root</font> ,  Password: <font color="#FF0000">root</font>'''
 +
::'''Common User: <font color="#FF0000">itead</font>,  Password: <font color="#FF0000">itead</font>'''
  
−
*'''<strike>[http://itead.me/ITEADDownload/images/iteados-A10-debian-xfce-2.0.4-2014-05-13.img.bz2 ITEAD OS 2.0.4 for A10 SD Card]</strike>'''
+
Features:  
−
 
+
* added SPI driver;  
−
*'''<strike>[http://itead.me/ITEADDownload/images//ITEAD-OS-A20-Debian-xfce-2.0.9-2014-10-17.img.zip ITEAD OS 2.0.9 for A20 SD Card]</strike>'''
+
* integrated [[ITEAD SDK|Itead SDK]] 2.9,for details, please visit https://github.com/itead/sdk/;  
−
 
+
* compiled NAND driver as module, and does not load automatically, which fixed the bug that damaged NAND Android image after booting up from the SD card;  
−
::Features:  
+
* cancelled SD card expansion script running automatically, if expansion is needed, please type the following code manually:  
−
::* added SPI driver;  
+
−
::* integrated [[ITEAD SDK|Itead SDK]] 2.9,for details, please visit https://github.com/itead/sdk/;  
+
−
::* compiled NAND driver as module, and does not load automatically, which fixed the bug that damaged NAND Android image after booting up from the SD card;  
+
−
::* cancelled SD card expansion script running automatically, if expansion is needed, please type the following code manually:  
+
 
  <code>sudo /etc/resize.sh  
 
  <code>sudo /etc/resize.sh  
 
</code>
 
</code>
  
−
*'''[http://itead.me/ITEADDownload/images/ITEAD-OS-A20-2G-Debian-xfce-2.1.1-2014-11-04.img.gz ITEAD OS 2.1.1 for A20 SD Card (2G)]'''
+
'''[http://itead.qiniudn.com/ITEAD-OS-A20-2G-Debian-xfce-2.1.1-2014-11-04.img.gz ITEAD OS 2.1.1 for A20 SD Card (2G)]''' Download 2 (Recommend)
  
−
*'''[http://iteadstudio.dbankcloud.com/ITEAD-OS-A20-1G-Debian-xfce-2.1.1-2014-11-04.img.gz ITEAD OS 2.1.1 for A20 SD Card (1G)]'''
+
'''[http://itead.qiniudn.com/ITEAD-OS-A20-1G-Debian-xfce-2.1.1-2014-11-04.img.gz ITEAD OS 2.1.1 for A20 SD Card (1G)]''' Download 3 (Recommend)
  
−
::Features:  
+
'''[http://dl.itead.cc/ARM/IM130808014/iteados-A10-debian-xfce-2.0.4-2014-05-13.img.bz2 ITEAD OS 2.0.4 for A10 SD Card (1G)]''' Download 4 (Recommend)
−
::* Support SPI driver;  
+
 
−
::* Integrated [[ITEAD SDK|Itead SDK]] 2.9.6 (every new image will be integrated with the newest SDK),for details, please visit https://github.com/itead/sdk/;  
+
A20 (2G) MD5: 48547400DA5A5D4B52606C990E239A74
−
::* Support NAND driver;  
+
 
−
::* Support Images uploading to NAND from SD card, please type the following code:
+
A20 (1G) MD5: 715E75ADFD00939591F25A6DAFCB1B78
−
:::(run commands as root user)
+
 
 +
Features:  
 +
* Support SPI driver;  
 +
* Integrated [[ITEAD SDK|Itead SDK]] 2.9.6 (every new image will be integrated with the newest SDK),for details, please visit https://github.com/itead/sdk/;  
 +
* Support NAND driver;  
 +
* Support Images uploading to NAND from SD card, please type the following code(run commands as root user):
  
 
  <code>cd /root/itead-nand-install
 
  <code>cd /root/itead-nand-install
Line 44: Line 94:
 
</code>
 
</code>
  
−
:::You can complete the installation according to the notice in script. It costs tens of minutes to do installing, please be patient.
+
:You can complete the installation according to the notice in script. It costs tens of minutes to do installing, please be patient.
  
−
:::'''Troubleshooting:'''
+
'''Troubleshooting:'''
−
:::If you can't launch system from NandFlash after installation, please try [http://cubieboard.org/download/ lunbuntu system]. You can use PhoenixSuite to burn the image into Nand and then run the installation commands again. Please refer to http://cubian.org/2014/06/30/troubleshooting-nandinstall-on-a20/ , it will help your solve the problems you meet during the installation.
+
:If you can't launch system from NandFlash after installation, please try [http://cubieboard.org/download/ lunbuntu system]. You can use PhoenixSuite to burn the image into Nand and then run the installation commands again. Please refer to http://cubian.org/2014/06/30/troubleshooting-nandinstall-on-a20/ , it will help your solve the problems you meet during the installation.
−
::*Support SD card capacity expansion. If expansion is needed, please type the following code manually:  
+
*Support SD card capacity expansion. If expansion is needed, please type the following code manually:  
  
 
  <code>cd /root/
 
  <code>cd /root/
Line 55: Line 105:
 
  /etc/resize.sh # After the command, the SD card expansion succeeds
 
  /etc/resize.sh # After the command, the SD card expansion succeeds
 
</code>
 
</code>
−
----
+
*Support 1000M-Ethernet
−
'''[http://itead.me/ITEADDownload/images/ITEAD-Android4.2-A20-1.0.img.zip ITEAD Android 4.2 A20 1.0]'''
+
:This image supports both 100M and 1000M Ethernet. The default set is 1000M-Ethernet.
 +
:Switch to 100M-Ethernet, the command is
 +
  <code>sudo itead-ethernet emac
 +
</code>
 +
:Switch to 1000M-Ethernet, the command is
 +
<code>sudo itead-ethernet gmac
 +
</code>
 +
:Changes take effect after system restarts.
 +
:Please note that Iteaduino plus only supports 100M-Ethernet, you need to switch to 100M-Ethernet mode when you use it in your projects.
 +
 
 +
*In ITEAD-OS, sometimes segment fault appears when '''spi_sun7i.ko''' is reloaded after uninstalling.
 +
*Set up the ITEAD-OS from SD card by using EVB+AW204X Core, if you meet the problem of network connection fail, you'd better turn off the power, wait a second, then power the EVB again. Please note that pressing reset button doesn't help to solve this problem.
 +
 
 +
===Android===
 +
'''[http://itead.qiniudn.com/ITEAD-Android4.2-A20-1.0.img ITEAD Android 4.2 A20 1.0]'''
  
 
This image is a customized Android 4.2 for ITEAD Core A20. Installing this image in Core A20, you can get a real android mini pc and realize all features of android 4.2.
 
This image is a customized Android 4.2 for ITEAD Core A20. Installing this image in Core A20, you can get a real android mini pc and realize all features of android 4.2.
Line 62: Line 126:
 
:*Support both ITEAD Core A20 1G and 2G versions
 
:*Support both ITEAD Core A20 1G and 2G versions
  
−
----
+
===Sun7i Android===
  
 
'''[http://itead.me/ITEADDownload/images/sun7i_android_sugar-standard.img.bz2 sun7i android sugar standard NAND]'''
 
'''[http://itead.me/ITEADDownload/images/sun7i_android_sugar-standard.img.bz2 sun7i android sugar standard NAND]'''
  
  
−
----
+
===Sunflower===
  
−
'''[http://iteadstudio.dbankcloud.com/sunflower-1.0-beta1.img.7z Sunflower-1.0-beta1 for Iteaduino Plus A10 SD Card]'''
+
<s>'''[http://iteadstudio.dbankcloud.com/sunflower-1.0-beta1.img.7z Sunflower-1.0-beta1 for Iteaduino Plus A10 SD Card]'''</s>
  
 
Features:
 
Features:
  
−
* Based on Linaro 12.11 Precise Pangolin,
+
* <s>Based on Linaro 12.11 Precise Pangolin,</s>
−
* Linux 3.4.67+ with various modules,
+
* <s>Linux 3.4.67+ with various modules,</s>
−
* FBTURBO driver with G2D for X11 / 2D acceleration,
+
* <s>FBTURBO driver with G2D for X11 / 2D acceleration,</s>
−
* OpenGL ES. 2.0,
+
* <s>OpenGL ES. 2.0,</s>
−
* Support for Cedar / CedarX included,
+
* <s>Support for Cedar / CedarX included,</s>
−
* HW Accelerated XBMC 12.2 with OpenGL ES 2.0 + Librhybris / CedarX
+
* <s>HW Accelerated XBMC 12.2 with OpenGL ES 2.0 + Librhybris / CedarX</s>
−
* Selectable resolution 720p / 1080p via boot.scr,
+
* <s>Selectable resolution 720p / 1080p via boot.scr,</s>
−
* Reseverd 128MB for Mali400 and 128MB for G2D,
+
* <s>Reseverd 128MB for Mali400 and 128MB for G2D,</s>
−
* HDMI Audio Output,
+
* <s>HDMI Audio Output,</s>
−
* Other optimalizations,
+
* <s>Other optimalizations,</s>
−
* Fastest libiteadIO – GPIO Speed to 1.1MHz
+
* <s>Fastest libiteadIO – GPIO Speed to 1.1MHz</s>
  
−
----
+
===Fedora===
  
  
Line 95: Line 159:
  
 
If the above link does not work, try http://pan.baidu.com/s/1gdyvTi7
 
If the above link does not work, try http://pan.baidu.com/s/1gdyvTi7
−
 
−
----
 

Latest revision as of 03:04, 11 April 2016

Introduction

This page serves for the images download. Images in this page all can be installed in the products such as IBox, Iteaduino Plus, ITEAD Core A20. Installing these images, you need some tools to help you burn them into your device. You can find the images installation tutorial in this link. http://blog.iteadstudio.com/ibox-upgrade-guide-phoenixsuit-tool-2/

Good luck!

Property Unit Value
Specific Gravity — 1.91-1.2
Rockwell Hardness gk/cm2 M-100
Shear Strength gk/cm2 630
Flexural Strength gk/cm2 1050
Tensile Strength gk/cm2 760
Compressive Strength gk/cm2 1260
Specific Heat Cal/gr℃ 0.35
Dielectic Strength Kv/mm 20
Surface Resistivity Ohm 1016
Light Transmittance % 93
Refractive Index —
Coefficient of Thermal Conductivity Cal/xee/cm/℃/cm
Hot Foming Temp ℃ 140-180
Hot Deformation Temp ℃ 100
Thermal Expansion Coefficient Cm/cm/℃ 6*10-5
Water Absorption(24Hrs) % 0.3

Tools

Win32 Disk Imager

This program is designed to write a raw disk image to a removable device or backup a removable device to a raw image file. It is very useful for embedded development, namely Arm development projects (Android, Ubuntu on Arm, etc). Anyone is free to branch and modify this program.

You can download from SourceForge

LiveSuit / PhoenixSuit

LiveSuit is developed by Allwinner as a installation application for Microsoft Windows/Linux/MAC to flash the NAND for Allwinner chips. For more information, you can refer to http://linux-sunxi.org/LiveSuit

You can download here


Images

ITEAD OS

Note:

  • 1. We offer several download links here in case one of them doesn't work for you.
  • 2. Default account and password to login system：
Admin: root , Password: root
Common User: itead, Password: itead

Features:

  • added SPI driver;
  • integrated Itead SDK 2.9,for details, please visit https://github.com/itead/sdk/;
  • compiled NAND driver as module, and does not load automatically, which fixed the bug that damaged NAND Android image after booting up from the SD card;
  • cancelled SD card expansion script running automatically, if expansion is needed, please type the following code manually: 
sudo /etc/resize.sh

ITEAD OS 2.1.1 for A20 SD Card (2G) Download 2 (Recommend)

ITEAD OS 2.1.1 for A20 SD Card (1G) Download 3 (Recommend)

ITEAD OS 2.0.4 for A10 SD Card (1G) Download 4 (Recommend)

A20 (2G) MD5: 48547400DA5A5D4B52606C990E239A74

A20 (1G) MD5: 715E75ADFD00939591F25A6DAFCB1B78

Features:

  • Support SPI driver;
  • Integrated Itead SDK 2.9.6 (every new image will be integrated with the newest SDK),for details, please visit https://github.com/itead/sdk/;
  • Support NAND driver;
  • Support Images uploading to NAND from SD card, please type the following code(run commands as root user): 
cd /root/itead-nand-install
./itead-nand-install.sh

You can complete the installation according to the notice in script. It costs tens of minutes to do installing, please be patient.

Troubleshooting:

If you can't launch system from NandFlash after installation, please try lunbuntu system. You can use PhoenixSuite to burn the image into Nand and then run the installation commands again. Please refer to http://cubian.org/2014/06/30/troubleshooting-nandinstall-on-a20/ , it will help your solve the problems you meet during the installation.
  • Support SD card capacity expansion. If expansion is needed, please type the following code manually: 
cd /root/
 /etc/resize.sh # You will be asked to reboot! After reboot, please continue to the next command.
cd /root/
/etc/resize.sh # After the command, the SD card expansion succeeds

  • Support 1000M-Ethernet
This image supports both 100M and 1000M Ethernet. The default set is 1000M-Ethernet.
Switch to 100M-Ethernet, the command is 
 sudo itead-ethernet emac

Switch to 1000M-Ethernet, the command is 
sudo itead-ethernet gmac

Changes take effect after system restarts.
Please note that Iteaduino plus only supports 100M-Ethernet, you need to switch to 100M-Ethernet mode when you use it in your projects.
  • In ITEAD-OS, sometimes segment fault appears when spi_sun7i.ko is reloaded after uninstalling.
  • Set up the ITEAD-OS from SD card by using EVB+AW204X Core, if you meet the problem of network connection fail, you'd better turn off the power, wait a second, then power the EVB again. Please note that pressing reset button doesn't help to solve this problem.

Android

ITEAD Android 4.2 A20 1.0

This image is a customized Android 4.2 for ITEAD Core A20. Installing this image in Core A20, you can get a real android mini pc and realize all features of android 4.2.

  • Support both ITEAD Core A20 1G and 2G versions

Sun7i Android

sun7i android sugar standard NAND


Sunflower

Sunflower-1.0-beta1 for Iteaduino Plus A10 SD Card

Features:

  • Based on Linaro 12.11 Precise Pangolin,
  • Linux 3.4.67+ with various modules,
  • FBTURBO driver with G2D for X11 / 2D acceleration,
  • OpenGL ES. 2.0,
  • Support for Cedar / CedarX included,
  • HW Accelerated XBMC 12.2 with OpenGL ES 2.0 + Librhybris / CedarX
  • Selectable resolution 720p / 1080p via boot.scr,
  • Reseverd 128MB for Mali400 and 128MB for G2D,
  • HDMI Audio Output,
  • Other optimalizations,
  • Fastest libiteadIO – GPIO Speed to 1.1MHz

Fedora

Fedora 19 ARM for Allwinner A10, A10s, A13 and A20 devices SD Card

This image is original from Hans de Goede https://groups.google.com/forum/#!topic/linux-sunxi/PLgUj-KefKQ

You can download the image from http://ubuntuone.com/3hcPtqWMZOTkMJSsge6Lmu

If the above link does not work, try http://pan.baidu.com/s/1gdyvTi7

Retrieved from "https://wiki.iteadstudio.com/index.php?title=Download&oldid=4513"