NoticeDifference between revisions of "4-20mA Sensor Brick"
From ITEAD Wiki
(Created page with "==Overview== 4~20mA Sensor Brick is a module that can be used to test electronic current loop from 4mA to 20mA and support type2,3,4 current output. With a 5V to 24V DC-DC pow...") |
m (→The relationship between output voltage and input current in channel 1,2) |
||
| (15 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
| − | 4~20mA Sensor Brick is | + | [[File:IM140819001_4.jpg|400px|thumb|right]] |
| + | 4~20mA Sensor Brick is an electronic brick module that can be used to test electronic current loop from 4mA to 20mA and support type2,3,4 current output. With a 5V to 24V DC-DC power boost convertor, its max current output can be 150mA, which can be for equipment use. | ||
| + | |||
| + | Go shopping [http://imall.iteadstudio.com/im140819001.html 4-20mA Sensor Brick(IM140819001)] | ||
==Features== | ==Features== | ||
| Line 14: | Line 17: | ||
|- | |- | ||
| Compatible interfaces||2.54 4-pin interface and 4-pin Grove interface(1) | | Compatible interfaces||2.54 4-pin interface and 4-pin Grove interface(1) | ||
| − | | | + | |- |
|} | |} | ||
| Line 35: | Line 38: | ||
==Hardware== | ==Hardware== | ||
| + | [[File:IM140819001pic1.jpg|500px]] | ||
| + | [[File:IM140819001pic2.jpg|500px]] | ||
| + | [[File:IM140819001pic3.jpg|500px]] | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | | align="center" style="background:#f0f0f0;"| | ||
| + | | align="center" style="background:#f0f0f0;"|'''JP1''' | ||
| + | | align="center" style="background:#f0f0f0;"|'''JP2''' | ||
| + | |- | ||
| + | | Connected||CH1 Type 2/3||CH2 Type 2/3 | ||
| + | |- | ||
| + | | Disconnected||CH1 Type4||CH2 Type4 | ||
| + | |- | ||
| + | |} | ||
| + | |||
| + | ==Loop current type== | ||
| + | *'''Type 2 loop current''' | ||
| + | [[File:type 2 loop current.jpg|400px]] | ||
| + | *'''Type 3 loop current''' | ||
| + | [[File:type 3 loop current.jpg|400px]] | ||
| + | *'''Type 4 loop current''' | ||
| + | [[File:type 4 loop current.jpg|400px]] | ||
==The relationship between output voltage and input current in channel 1,2== | ==The relationship between output voltage and input current in channel 1,2== | ||
| − | + | In theory, their relationship can be described into this formula: | |
| + | |||
| + | Vout1 = R1 * Iin1 * 2 | ||
| + | |||
| + | Vout2 = R2 * Iin2 * 2 | ||
| + | |||
| + | R1=R2=100ohm | ||
| + | |||
| + | Note: error ±2% in practical test. | ||
| + | |||
| + | ==Instruction== | ||
| + | *1. Upload the demo [[:File:4_20mA_demo.zip]] into Iteaduino UNO | ||
| + | *2. Connect the sensor brick and UNO as following picture. S1->A4 and S2->A5. | ||
| + | ::[[File:IM140819001in1.jpg|500px]] | ||
| + | *3. Measure current loop | ||
| + | ::When access in type2,3 loop current, please connect JP1 or JP2, both 1In- and 2In- is equal to connecting ground, 1In+ and 2In+ are connected with the current pins to be measured. | ||
| + | ::When access in type4 loop current, connect the input end to 1In+ or 2In+, the output end to 1In- or 2In-, and unplug JP1 or JP2 simultaneously. | ||
| − | == | + | ==Download== |
| − | * | + | *Schematic--[[:File:IM140819001-4~20mA Sensor Brick-schematic.pdf]] |
| − | + | ||
Latest revision as of 01:45, 31 January 2015
Contents
Overview
4~20mA Sensor Brick is an electronic brick module that can be used to test electronic current loop from 4mA to 20mA and support type2,3,4 current output. With a 5V to 24V DC-DC power boost convertor, its max current output can be 150mA, which can be for equipment use.
Go shopping 4-20mA Sensor Brick(IM140819001)
Features
- Compatible with the mainstream 2.54 and 4-pin Grove interface in market
- Compatible with type2,3,4 electronic current loop
- With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock.
Specification
| PCB size | 40.6mm X 29mm X 1.6mm |
| Power supply | 5V DC |
| Compatible interfaces | 2.54 4-pin interface and 4-pin Grove interface(1) |
Electronic Characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Power supply | 4.5 | 5 | 5.5 | VDC |
| Input measurement current | 4 | - | 20 | mA |
| Output Current(DCDC) | - | - | 150 | mA |
Hardware
| JP1 | JP2 | |
| Connected | CH1 Type 2/3 | CH2 Type 2/3 |
| Disconnected | CH1 Type4 | CH2 Type4 |
Loop current type
- Type 2 loop current
- Type 3 loop current
- Type 4 loop current
The relationship between output voltage and input current in channel 1,2
In theory, their relationship can be described into this formula:
Vout1 = R1 * Iin1 * 2
Vout2 = R2 * Iin2 * 2
R1=R2=100ohm
Note: error ±2% in practical test.
Instruction
- 1. Upload the demo File:4_20mA_demo.zip into Iteaduino UNO
- 2. Connect the sensor brick and UNO as following picture. S1->A4 and S2->A5.
- 3. Measure current loop
- When access in type2,3 loop current, please connect JP1 or JP2, both 1In- and 2In- is equal to connecting ground, 1In+ and 2In+ are connected with the current pins to be measured.
- When access in type4 loop current, connect the input end to 1In+ or 2In+, the output end to 1In- or 2In-, and unplug JP1 or JP2 simultaneously.
