NoticeDifference between revisions of "CH375B USB Bus General Interface Module"
From ITEAD Wiki
(→Download) |
(→Overview) |
||
| Line 2: | Line 2: | ||
[[File:CH375B.jpg|thumb|400px|right]] | [[File:CH375B.jpg|thumb|400px|right]] | ||
CH375B is a USB bus general interface chip with 8-bit data bus and control lines for reading, writing and chip selection and output interruption, which can be easily attached to the system bus of controllers such as MCU / DSP / MPU. In USB host mode, CH375B also provides serial communication, which can be connected to MCU / DSP / MPU, etc. via serial input, serial output, and interrupt output. | CH375B is a USB bus general interface chip with 8-bit data bus and control lines for reading, writing and chip selection and output interruption, which can be easily attached to the system bus of controllers such as MCU / DSP / MPU. In USB host mode, CH375B also provides serial communication, which can be connected to MCU / DSP / MPU, etc. via serial input, serial output, and interrupt output. | ||
| + | |||
| + | Go shopping [http://imall.iteadstudio.com/ch375b-usb-bus-general-interface-module.html CH375B USB Bus General Interface Module (IM131009001)] | ||
==Connector== | ==Connector== | ||
Latest revision as of 07:39, 11 June 2014
Overview
CH375B is a USB bus general interface chip with 8-bit data bus and control lines for reading, writing and chip selection and output interruption, which can be easily attached to the system bus of controllers such as MCU / DSP / MPU. In USB host mode, CH375B also provides serial communication, which can be connected to MCU / DSP / MPU, etc. via serial input, serial output, and interrupt output.
Go shopping CH375B USB Bus General Interface Module (IM131009001)
Connector
- 2x8 connector, can be easily hooked to MCU
Parameters
- Can be operated in parallel or serial mode according to the jumper
- USB status indicator
- Onboard 3.3V LDO 1117, providing current up to 800mA
- 5V power supply from the target board
- 12MHZ crystal
