NoticeDifference between revisions of "Serial Port Bluetooth Module (Slave): HC-06"
From ITEAD Wiki
(→Download) |
m (→Download) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
| + | [[File:HC-06.jpg|thumb|400px|right]] | ||
Serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded [[project]] and etc. | Serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded [[project]] and etc. | ||
| + | |||
| + | Go shopping [http://imall.iteadstudio.com/im120723010.html Serial Port Bluetooth Module (Slave): HC-06 (IM120723010)] | ||
==Feature== | ==Feature== | ||
| Line 60: | Line 63: | ||
==Download== | ==Download== | ||
[ftp://imall.iteadstudio.com/Modules/IM120723010/DS_IM120723010.pdf Datasheet] | [ftp://imall.iteadstudio.com/Modules/IM120723010/DS_IM120723010.pdf Datasheet] | ||
| + | |||
| + | [[:File:ATSZR170210006001-RoHS-Eng-A(1).pdf | ATSZR170210006001-RoHS]] | ||
| + | |||
| + | [[:File:SZR170210006001-4P HBCDD-Eng-A.pdf | SZR170210006001-4P HBCDD]] | ||
==Useful Links== | ==Useful Links== | ||
Latest revision as of 03:52, 24 March 2017
Contents
Overview
Serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
Go shopping Serial Port Bluetooth Module (Slave): HC-06 (IM120723010)
Feature
- Use the CSR Bluetooth chip, compatible with the Bluetooth V2.0 protocol
- Operating Voltage 3.3V
- Adjustable baud rate : 1200，2400，4800，9600,19200，38400，57600，115200
- Size: 28mm x 15 mm x 2.35mm
- Operating Current 40 mA
- Sleep Current < 1mA
Default
Slave, 9600 baud rate, N, 8, 1. Pincode 1234
AT command
1. Communications Test
- Sent : AT
- Receive : OK 2.
2.Change baud rate
- Sent : AT+BAUD1
- Receive : OK1200
- Sent : AT+BAUD2
- Receive : OK2400
1---------1200
2---------2400
3---------4800
4---------9600
5---------19200
6---------38400
7---------57600
8---------115200
Baud rate setting can be saved even power down.
3. Change Bluetooth device name
- Sent : AT+NAMEdevicename
- Receive : OKname
(devicename is the name you want the device to be , and it will be searched with this name)
Name setting can be saved even power down.
4. Change Pincode
- Sent : AT+PINxxxx
- Receive : OKsetpin
(xxxx is the pin code you set)
Pin code can be saved even power down.
