NoticeDifference between revisions of "BTBee"
From ITEAD Wiki
(Created page with "==Overview== right BTBee is an easy-to-use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial...") |
(→Overview) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 5: | Line 5: | ||
The HC-06 Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR(Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature).It even has the smallest footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle. | The HC-06 Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR(Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature).It even has the smallest footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle. | ||
| + | |||
| + | Go shopping [http://imall.iteadstudio.com/im120606004.html BTBee (IM120606004)] | ||
==Features== | ==Features== | ||
| Line 16: | Line 18: | ||
==Software Features== | ==Software Features== | ||
| − | * Default Baud rate: | + | * Default Baud rate: 9600, Data bits:8, Stop bit:1,Parity:No parity, Data control: has. |
* Supported baud rate: 9600,19200,38400,57600,115200,230400,460800. | * Supported baud rate: 9600,19200,38400,57600,115200,230400,460800. | ||
* Use CTS and RTS to control the data stream. | * Use CTS and RTS to control the data stream. | ||
| Line 25: | Line 27: | ||
==Download== | ==Download== | ||
| + | [ftp://imall.iteadstudio.com/Modules/IM120606004_BTBee/SCH_IM120606004_BTBee.pdf Schematic] | ||
==Useful Links== | ==Useful Links== | ||
Latest revision as of 07:28, 11 June 2014
Overview
BTBee is an easy-to-use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup.
The HC-06 Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR(Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature).It even has the smallest footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle.
Go shopping BTBee (IM120606004)
Features
- Typical -80dBm sensitivity
- Up to +4dBm RF transmit power
- Fully Qualified Bluetooth V2.0+EDR 3Mbps Modulation
- 3.3V Operation, 1.8 to 3.6V I/O PIO control
- UART interface with programmable baud rate
- Integrated PCB antenna
- Bee compatible headers
Software Features
- Default Baud rate: 9600, Data bits:8, Stop bit:1,Parity:No parity, Data control: has.
- Supported baud rate: 9600,19200,38400,57600,115200,230400,460800.
- Use CTS and RTS to control the data stream.
- When a rising pulse is detected in PIO0, device will be disconnected.
- Auto-connect the last device on power as default.
- Permit matched device connect by default.Default PINCODE:1234.
- Auto-reconnect in 30 min when disconnected as a result of beyond the range of connection.
