NoticeDifference between revisions of "MAX485 MODULE"
(Created page with "==Overview== right On-board MAX485 chip is a low-power and slew-rate-limited transceiver used for RS-485 communication. It works at a sin...") |
(→Overview) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
disabled. The driver is limited for short-circuit current and the driver outputs can be placed at a high impedance state | disabled. The driver is limited for short-circuit current and the driver outputs can be placed at a high impedance state | ||
through the thermal shutdown circuit. The receiver input has a fail-safe feature that guarantees logic high output if the | through the thermal shutdown circuit. The receiver input has a fail-safe feature that guarantees logic high output if the | ||
| − | input is open circuit. In addition, it has a strong anti-interference performance. | + | input is open circuit. In addition, it has a strong anti-interference performance. |
| − | + | ||
| + | Go shopping [http://imall.iteadstudio.com/max485-module.html MAX485 MODULE (IM130710001)] | ||
| + | |||
==Specifications== | ==Specifications== | ||
Board dimension：44(mm)x14(mm) | Board dimension：44(mm)x14(mm) | ||
| Line 23: | Line 25: | ||
==Download== | ==Download== | ||
| + | [ftp://imall.iteadstudio.com/Modules/IM130710001_MAX485/DS_IM130710001.pdf Datasheet for MAX485 MODULE] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/Modules/IM130710001_MAX485/DS_MAX485.pdf Datasheet for MAX485] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/Modules/IM130710001_MAX485/SCH_IM130710001.pdf Schematic] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/Modules/IM130710001_MAX485/DC_IM130710001.zip Demo code] | ||
==Useful Links== | ==Useful Links== | ||
Latest revision as of 07:13, 11 June 2014
Overview
On-board MAX485 chip is a low-power and slew-rate-limited transceiver used for RS-485 communication. It works at a single +5V power supply and the rated current is 300 μA. Adopting half-duplex communication to implement the function of converting TTL level into RS-485 level, it can achieve a maximum transmission rate of 2.5Mbps. MAX485 transceiver draws supply current of between 120μA and 500μA under the unloaded or fully loaded conditions when the driver is disabled. The driver is limited for short-circuit current and the driver outputs can be placed at a high impedance state through the thermal shutdown circuit. The receiver input has a fail-safe feature that guarantees logic high output if the input is open circuit. In addition, it has a strong anti-interference performance.
Go shopping MAX485 MODULE (IM130710001)
Specifications
Board dimension：44(mm)x14(mm) Working voltage：5V Connect to 5.08 (mm) 2P terminal on board, for wiring of RS-485 to communicate All pins on the chip have been broken out, which can be controlled and operated via microcontroller
Applications
- Low-Power RS-485 Transceivers
- Low-Power RS-422 Transceivers
- Level Translators
- Transceivers for EMI-Sensitive Applications
- Industrial-Control Local Area Networks
