Difference between revisions of "ITDB02-4.3"
From ITEAD Wiki
(Created page with "==Overview== ==Hardware== ==Download== ==Useful Links==") |
m (→Overview) |
||
(10 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
+ | |||
+ | [[File:ITDB02-4.3.jpg|thumb|400px|right]] | ||
+ | |||
+ | ITDB02-4.3 display module is a 4.3" TFT LCD with 65K color 272x 480 resolutions. The controller of this LCD module is SSD1963. It supports 16bit data interface with control interface of 4 wires. Moreover, this module contains the touch screen and SD card socket. | ||
+ | |||
+ | ITDB02-4.3 is supported by UTFT Library. | ||
+ | |||
+ | Go shopping [http://imall.iteadstudio.com/im120419007.html ITDB02-4.3 (IM120419007)] | ||
+ | |||
+ | ==Specifications== | ||
+ | |||
+ | {| border="1" | ||
+ | | Driver IC||SSD1963 | ||
+ | |- | ||
+ | | Backlight||10LEDs | ||
+ | |- | ||
+ | | Power supply||3.3V | ||
+ | |- | ||
+ | | Touch Panel||Y | ||
+ | |- | ||
+ | | Touch IC||XPT2046 | ||
+ | |- | ||
+ | | Resolution||480*272 | ||
+ | |- | ||
+ | | Size||105mm*79mm | ||
+ | |- | ||
+ | |} | ||
+ | |||
==Hardware== | ==Hardware== | ||
+ | http://imall.iteadstudio.com/media/wysiwyg/Products/TFTLCDs/ITDB02-4.3.jpg | ||
+ | |||
+ | [[File:ITDB02-4.3-parallel.jpg|400px]] | ||
− | == | + | {| class="wikitable" |
+ | |- | ||
+ | | align="center" style="background:#f0f0f0;"|'''Pin''' | ||
+ | | align="center" style="background:#f0f0f0;"|'''Type*''' | ||
+ | | align="center" style="background:#f0f0f0;"|'''Description''' | ||
+ | |- | ||
+ | | GND||G||Ground | ||
+ | |- | ||
+ | | VCC||P||5V Power Supply pin | ||
+ | |- | ||
+ | | NC||-||No connection | ||
+ | |- | ||
+ | | RS||I||Data/Command selection | ||
+ | |- | ||
+ | | WR||I||Write signal enable, low active | ||
+ | |- | ||
+ | | RD||I||Read signal enable, low active | ||
+ | |- | ||
+ | | DB8||I||Data Bus | ||
+ | |- | ||
+ | | DB9||I||Data Bus | ||
+ | |- | ||
+ | | DB10||I||Data Bus | ||
+ | |- | ||
+ | | DB11||I||Data Bus | ||
+ | |- | ||
+ | | DB12||I||Data Bus | ||
+ | |- | ||
+ | | DB13||I||Data Bus | ||
+ | |- | ||
+ | | DB14||I||Data Bus | ||
+ | |- | ||
+ | | DB15||I||Data Bus | ||
+ | |- | ||
+ | | CS||I||Chip Selection,Low level active | ||
+ | |- | ||
+ | | NC||-||No connection | ||
+ | |- | ||
+ | | LED||P||Backlight | ||
+ | |- | ||
+ | | NC||-||No connection | ||
+ | |- | ||
+ | | DB0||I||Data Bus | ||
+ | |- | ||
+ | | DB1||I||Data Bus | ||
+ | |- | ||
+ | | DB2||I||Data Bus | ||
+ | |- | ||
+ | | DB3||I||Data Bus | ||
+ | |- | ||
+ | | DB4||I||Data Bus | ||
+ | |- | ||
+ | | DB5||I||Data Bus | ||
+ | |- | ||
+ | | DB6||I||Data Bus | ||
+ | |- | ||
+ | | DB7||I||Data Bus | ||
+ | |- | ||
+ | | T_CLK||I||Touch clock | ||
+ | |- | ||
+ | | T_CS||I||Touch chip selection | ||
+ | |- | ||
+ | | T_DIN||I||Touch data input | ||
+ | |- | ||
+ | | T_BUSY||O||Touch status | ||
+ | |- | ||
+ | | T_DOUT||O||Touch data output | ||
+ | |- | ||
+ | | T_IRQ||O||Touch interrupt | ||
+ | |- | ||
+ | | SD_SO||O||SD MISO | ||
+ | |- | ||
+ | | SD_SCK||I||SD SCK | ||
+ | |- | ||
+ | | SD_SI||I||SD MOSI | ||
+ | |- | ||
+ | | SD_NSS||I||SD NSS | ||
+ | |- | ||
+ | | NC||-||No connection | ||
+ | |- | ||
+ | | NC||-||No connection | ||
+ | |} | ||
==Useful Links== | ==Useful Links== | ||
+ | [http://www.rinkydinkelectronics.com/library.php?id=51 by Henning Karlsen <UTFT library>] |
Latest revision as of 06:22, 12 January 2017
Overview
ITDB02-4.3 display module is a 4.3" TFT LCD with 65K color 272x 480 resolutions. The controller of this LCD module is SSD1963. It supports 16bit data interface with control interface of 4 wires. Moreover, this module contains the touch screen and SD card socket.
ITDB02-4.3 is supported by UTFT Library.
Go shopping ITDB02-4.3 (IM120419007)
Specifications
Driver IC | SSD1963 |
Backlight | 10LEDs |
Power supply | 3.3V |
Touch Panel | Y |
Touch IC | XPT2046 |
Resolution | 480*272 |
Size | 105mm*79mm |
Hardware
Pin | Type* | Description |
GND | G | Ground |
VCC | P | 5V Power Supply pin |
NC | - | No connection |
RS | I | Data/Command selection |
WR | I | Write signal enable, low active |
RD | I | Read signal enable, low active |
DB8 | I | Data Bus |
DB9 | I | Data Bus |
DB10 | I | Data Bus |
DB11 | I | Data Bus |
DB12 | I | Data Bus |
DB13 | I | Data Bus |
DB14 | I | Data Bus |
DB15 | I | Data Bus |
CS | I | Chip Selection,Low level active |
NC | - | No connection |
LED | P | Backlight |
NC | - | No connection |
DB0 | I | Data Bus |
DB1 | I | Data Bus |
DB2 | I | Data Bus |
DB3 | I | Data Bus |
DB4 | I | Data Bus |
DB5 | I | Data Bus |
DB6 | I | Data Bus |
DB7 | I | Data Bus |
T_CLK | I | Touch clock |
T_CS | I | Touch chip selection |
T_DIN | I | Touch data input |
T_BUSY | O | Touch status |
T_DOUT | O | Touch data output |
T_IRQ | O | Touch interrupt |
SD_SO | O | SD MISO |
SD_SCK | I | SD SCK |
SD_SI | I | SD MOSI |
SD_NSS | I | SD NSS |
NC | - | No connection |
NC | - | No connection |