NoticeDifference between revisions of "WIFI SHIELD REV2"
(→Useful Links) |
m (→Useful Links) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
WIFI [[Shield]] REV2 supports IEEE 802.11b/g/n wireless protocol standard and serial output, which integrates TCP / IP protocol stack internally. It is specifically designed for Arduino boards including Arduino UNO, MEGA and Leonardo, and it supports 3.3V or 5V operation level so it can work with more Arduino-compatible boards. | WIFI [[Shield]] REV2 supports IEEE 802.11b/g/n wireless protocol standard and serial output, which integrates TCP / IP protocol stack internally. It is specifically designed for Arduino boards including Arduino UNO, MEGA and Leonardo, and it supports 3.3V or 5V operation level so it can work with more Arduino-compatible boards. | ||
| + | |||
| + | Go shopping [http://imall.iteadstudio.com/wifi-shield-rev2.html WIFI SHIELD REV2 (IM121010001)] | ||
==Specifications== | ==Specifications== | ||
| Line 129: | Line 131: | ||
[ftp://imall.iteadstudio.com/Shield/IM121010001/PM_RAK410_UART.pdf Programming Manual] | [ftp://imall.iteadstudio.com/Shield/IM121010001/PM_RAK410_UART.pdf Programming Manual] | ||
| − | [http://blog.iteadstudio.com/wp-content/uploads/2014/05/Mega_v3_115200.ino | + | [http://blog.iteadstudio.com/wp-content/uploads/2014/05/Mega_v3_115200.ino Demo for WIFI Shield REV2 with MEGA2560 v3 115200] |
| − | [http://blog.iteadstudio.com/wp-content/uploads/2014/05/UNO_rev0.ino | + | [http://blog.iteadstudio.com/wp-content/uploads/2014/05/UNO_rev0.ino Demo for WIFI Shield REV2 with UNO rev0] |
==Useful Links== | ==Useful Links== | ||
[http://www.rakwireless.com.cn/RAK410_pdf/RAK410_User_Guide.pdf Beijing Rakwireless Technology <RAK410-EVB User Guide>] | [http://www.rakwireless.com.cn/RAK410_pdf/RAK410_User_Guide.pdf Beijing Rakwireless Technology <RAK410-EVB User Guide>] | ||
| − | [http://blog.iteadstudio.com/basic-testtutorial-for-itead-wifi-shield-rev2-by-david-morphett/ | + | [http://blog.iteadstudio.com/basic-testtutorial-for-itead-wifi-shield-rev2-by-david-morphett/ Basic Test/Tutorial for ITEAD WIFI Shield REV2 - by David Morphett] |
Latest revision as of 08:53, 5 November 2014
Contents
Overview
WIFI Shield REV2 supports IEEE 802.11b/g/n wireless protocol standard and serial output, which integrates TCP / IP protocol stack internally. It is specifically designed for Arduino boards including Arduino UNO, MEGA and Leonardo, and it supports 3.3V or 5V operation level so it can work with more Arduino-compatible boards.
Go shopping WIFI SHIELD REV2 (IM121010001)
Specifications
| PCB size | 58.0mm X 56mm X 1.6mm |
| Operation level | 3.3V or 5V |
| Indicator | PWR |
Electrical Characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Power voltage | 3 | 3.3 | 3.6 | VDC |
| Working current (VCC=3.3V) | 0.5 | 15000 | 100000 | uA |
| Maximum radio frequency input (with reference to input of 50Ω) | - | 10 | - | dB |
| Static withstand voltage | - | - | 2000 | V |
Hardware
Pinmap
Micro SD Socket
| Index of Interface | Name of Interface | Index of Arduino |
| 1 | SD_CS | D10 |
| 2 | MOSI | D11 |
| 3 | 3V3 | - |
| 4 | SCK | D13 |
| 5 | GND | - |
| 6 | MISO | D12 |
WIFI module Interface
| Index of Interface | Name of Interface | Index of Arduino |
| 1 | WIFI_RST | D9 |
| Index of Interface | Name of Interface | Description |
| 1 | D-RX | Upgrade firmware, UART input |
| 2 | D-TX | Upgrade firmware, UART output |
| 3 | ERROR | Severe error of module, high level is valid. |
| 4 | WPS | WPS function input, descending portion is valid. If VDD/2 is input at the pin when starting, the module will enter WEB SERVER. |
| 5 | BOOT | Used in boot program, high level is valid. |
| 6 | RTS | UART requests sending |
| 7 | CTS | UART clears sending |
UART Multiplexer
You can connect pins TXD and RXD on the module to D0~7 of Arduino with a jumper.
When connection is done as below, WIFI shield is communicating with chip atmega328.
When connection is made as below, WIFI shield is communicating with chip atmega8U2 or FT232RL, and if they are connected to PC via USB cable, serial software in PC can be used to control or configure module HM-10.
In addition, pins TXD and RXD can also be connected to D2~7 to control module HM-10 with software serial library.
Switch of operation level
When switching to 3.3V, WIFI shield can communicate with mainboards with operation level of 3.3V, such as Arduino DUE; when switching to 5V, WIFI shield can communicate with mainboards with operation level of 5V, such as Arduino UNO.
When switching, supply voltage of V pin on the electronic brick interface will also change accordingly. when switching to 3.3V, voltage of V pin is 3.3V and it will be 5V when switching to 5V.
Switch for transparent transmission
When the switch turns to ‘Normal’, module is powered up but it will not enter transparent transmission mode; when the switch turns to ‘Transparent’, module will enter transparent transmission mode after powering up.
Indicator
- PWR, 3.3V supply indicator: when supply is normal, PWR indicator will keep ON.
Button
- WIFI_RST, WIFI resetting button: press the button to reset WIFI module.
Note
- There is no existing library to support the module at present.
Download
Datasheet for WIFI SHIELD REV2
Demo for WIFI Shield REV2 with MEGA2560 v3 115200
Demo for WIFI Shield REV2 with UNO rev0
Useful Links
Beijing Rakwireless Technology <RAK410-EVB User Guide>
Basic Test/Tutorial for ITEAD WIFI Shield REV2 - by David Morphett
