NoticeDifference between revisions of "BT BoosterPack"
From ITEAD Wiki
(→Features) |
|||
| Line 5: | Line 5: | ||
==Features== | ==Features== | ||
| + | * LaunchPad / LaucnchPad XL / LaunchPad XLL compatible, and stackable for other BoosterPack | ||
| + | * Up to10m communication distance in house without obstacle | ||
| + | * UART interface (TTL) with programmable baud rate (SPP firmware installed) | ||
| + | * Default baud rate: 38400(CMD MODE) / 9600(DATA MODE), data bits: 8, stop bit: 1, Parity: No parity | ||
| + | * Default PINCODE: 1234 | ||
| + | * A full set of configuration commandsOn board PCB antenna | ||
| + | * FCC ID certificated | ||
==Specifications== | ==Specifications== | ||
Revision as of 05:56, 26 May 2014
Contents
Overview
BT Boosterpack is a serial port Bluetooth shield for LaunchPad. BT Boosterpack expand the LaunchPad with Bluetooth communication functions, supports master and slave mode. It will be much easier to make your cell phone or laptop to talk with LaunchPad now.
Features
- LaunchPad / LaucnchPad XL / LaunchPad XLL compatible, and stackable for other BoosterPack
- Up to10m communication distance in house without obstacle
- UART interface (TTL) with programmable baud rate (SPP firmware installed)
- Default baud rate: 38400(CMD MODE) / 9600(DATA MODE), data bits: 8, stop bit: 1, Parity: No parity
- Default PINCODE: 1234
- A full set of configuration commandsOn board PCB antenna
- FCC ID certificated
Specifications
| Microprocessor | CSR BC417 |
| PCB size | 53.34mm X 43.18mm X 1.6mm |
| Indicators | PWR, status, link |
| Power supply | 3.3V DC |
| IO | 2 |
| Communication Protocol | UART/Bluetooth 2.0 |
Electrical Characteristics
| Specification | Min | Type | Max | Unit |
| Power Voltage | 3 | 3.3 | 3.6 | VDC |
| Input Voltage VH(Target Voltage = 3.3V ) | 3 | 3.3 | 3.6 | V |
| Input Voltage VL: | -0.3 | 0 | 0.5 | V |
| Current Consumption | 20 | 45 | mA |
