NoticeDifference between revisions of "ITEAD Joystick shield"
From ITEAD Wiki
(→Overview) |
(→Specifications) |
||
| Line 7: | Line 7: | ||
==Specifications== | ==Specifications== | ||
| + | {| border="1" | ||
| + | |||
| + | | PCB size||53.3mm X 68.6mm X 1.6mm | ||
| + | |- | ||
| + | | Power supply||5V/3.3V DC | ||
| + | |- | ||
| + | | RoSH||Yes | ||
| + | |} | ||
==Electrical Characteristics== | ==Electrical Characteristics== | ||
Revision as of 03:25, 23 May 2014
Contents
Overview
The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.
The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.
Specifications
| PCB size | 53.3mm X 68.6mm X 1.6mm |
| Power supply | 5V/3.3V DC |
| RoSH | Yes |
