NoticeDifference between revisions of "XBee Shield"
From ITEAD Wiki
(→Electrical Characteristics) |
(→Hardware) |
||
| Line 48: | Line 48: | ||
==Hardware== | ==Hardware== | ||
| + | http://imall.iteadstudio.com/media/wysiwyg/Products/IM120417004_XBeeShield/IM120417004_XBeeShield.jpg | ||
| + | |||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | | align="center" style="background:#f0f0f0;"|'''Zone''' | ||
| + | | align="center" style="background:#f0f0f0;"|'''Description''' | ||
| + | |- | ||
| + | | 1||XBee Socket | ||
| + | |- | ||
| + | | 2||Indication LED | ||
| + | |- | ||
| + | | 3||Serial communication pin select | ||
| + | |- | ||
| + | | 4||Wireless program Arduino jumper | ||
| + | |- | ||
| + | | 5||3.3V operation voltage jumper(When operated in 3.3V,install the jumper) | ||
| + | |} | ||
==Installation== | ==Installation== | ||
Revision as of 02:59, 22 May 2014
Contents
Overview
The XBee Shield simplifies the task of interfacing an XBee with your Arduino. This board mates directly with an Arduino Pro or USB board, and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and Series 2 (and 2.5), standard and Pro version.
Features
- Double shield interfaces compatible with Arduino for easy cascading
- 3 indicator (ON/SLEEP, RSSI, ASS) LED for XBee
- Provide maximal 500mA under 3.3V
- Full 2.54mm break out for XBee
- Switchable of communication with FTDI-USB or Arduino with HardwareSerial or SoftwareSerial
(1)RSSI: Receiver Signal Strength Indication
(2)ASS : Association
Specifications
| PCB size | 54.9mm X 58.8mm X 1.6mm |
| Indicators | PWR State, DI, DO, RSSI, ON, ASS |
| Power supply | 5V DC |
| Communication Protocol | UART/XBee |
| RoSH | Yes |
Electrical Characteristics
| Specification | Min | Type | Max | Unit |
| Power Voltage | 4.5 | 5 | 5.5 | VDC |
| Input Voltage VH: | 4.5 | 5 | 5.5 | V |
| Input Voltage VL: | -0.3 | 0 | 0.5 | V |
| Current Consumption | - | 20 | 40 | mA |
Hardware
| Zone | Description |
| 1 | XBee Socket |
| 2 | Indication LED |
| 3 | Serial communication pin select |
| 4 | Wireless program Arduino jumper |
| 5 | 3.3V operation voltage jumper(When operated in 3.3V,install the jumper) |
