NoticeDifference between revisions of "RASPBERRY PI GPS ADD-ON"
From ITEAD Wiki
(→Electrical characteristics) |
(→Hardware) |
||
| Line 29: | Line 29: | ||
==Hardware== | ==Hardware== | ||
| + | http://imall.iteadstudio.com/media/wysiwyg/Products/Modules/IM131227001.jpg | ||
==Pinmap== | ==Pinmap== | ||
Revision as of 07:08, 21 May 2014
Contents
Overview
Raspberry PI GPS Add-on is customized for Raspberry Pi interface based on NEO-6 GPS module. Through the serial port on Raspberry Pi, data returned from NEO-6 module can be received, thus information such as the current location and time can be searched.
Specifications
| PCB size | 58.5mm X 54.6mm X 1.6mm |
| Input voltage | 3.3V |
| Interface | UART |
| Baud rate | 38400 (default) |
Electrical characteristics
| Parameters | Min. | Typical | Max. | Unit |
| Supply voltage | - | 3.3 | 3.6 | VDC |
| Current consumption (average) | - | 40 | - | mA |
Hardware
