NoticeDifference between revisions of "W5100 Ethernet Network Module"
From ITEAD Wiki
(→Overview) |
m (→Overview) |
||
| Line 4: | Line 4: | ||
It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their [[project]]. | It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their [[project]]. | ||
| + | |||
| + | To make this module to work with SD card module, please read this blog: [http://blog.iteadstudio.com/how-to-make-w5100-module-work-with-sd-card-module | How to Make W5100 Module Work with SD Card Module?] | ||
Go shopping [http://imall.iteadstudio.com/m120525007.html W5100 Ethernet Network Module (IM120525007)] | Go shopping [http://imall.iteadstudio.com/m120525007.html W5100 Ethernet Network Module (IM120525007)] | ||
Revision as of 04:44, 31 December 2015
Contents
Overview
It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their project.
To make this module to work with SD card module, please read this blog: | How to Make W5100 Module Work with SD Card Module?
Go shopping W5100 Ethernet Network Module (IM120525007)
Features
- Supports 10/100 Base TX
- Supports half/full duplex operation
- Supports auto-negotiation and auto cross-over detection
- IEEE 802.3/802.3u Compliance
- Operates 3.3V with 5V I/O signal tolerance
- Supports network status indicator LEDs
- Includes Hardware Internet protocols: TCP, IP Ver.4, UDP, ICMP, ARP, PPPoE, IGMP
- Includes Hardware Ethernet protocols: DLC, MAC
- Supports 4 independent connections simultaneously
- Supports MCU bus Interface and SPI Interface
- Supports Direct/Indirect mode bus access
- Supports Socket API for easy application programming
- Temperature : 0 ~ 70℃ (Operation), -40 ~ 85℃ (Storage)
