Difference between revisions of "ITDB02-3.2WD"
From ITEAD Wiki
(→Hardware) |
m (→Features) |
||
(13 intermediate revisions by 3 users not shown) | |||
Line 5: | Line 5: | ||
ITDB02-3.2WD is supported by UTFT Library | ITDB02-3.2WD is supported by UTFT Library | ||
+ | |||
+ | Go shopping [http://imall.iteadstudio.com/im120419006.html ITDB02-3.2WD (IM120419006)] | ||
==Features== | ==Features== | ||
− | |||
* Compatible with UTFT library | * Compatible with UTFT library | ||
* With SD Card Socket | * With SD Card Socket | ||
Line 14: | Line 15: | ||
{| border="1" | {| border="1" | ||
− | | | + | | Driver IC||HX8352 |
+ | |- | ||
+ | | Backlight||4LEDs | ||
+ | |- | ||
+ | | Power supply||5V | ||
+ | |- | ||
+ | | Touch Panel||Y | ||
+ | |- | ||
+ | | Touch IC||XPT2046 | ||
|- | |- | ||
− | | | + | | Resolution||240*400 |
|- | |- | ||
− | | | + | | Size||95mm*65mm |
+ | |- | ||
|} | |} | ||
Line 32: | Line 42: | ||
| Power voltage||4.5||5||5.5||VDC | | Power voltage||4.5||5||5.5||VDC | ||
|- | |- | ||
− | | Input voltage VinH | + | | Input voltage VinH||3||3.3||3.6||V |
− | + | ||
− | + | ||
|- | |- | ||
| Input voltage VinL||-0.3||0||0.5||V | | Input voltage VinL||-0.3||0||0.5||V | ||
Line 44: | Line 52: | ||
http://imall.iteadstudio.com/media/wysiwyg/Products/TFTLCDs/IM120419006_ITDB02_3.2WD.jpg | http://imall.iteadstudio.com/media/wysiwyg/Products/TFTLCDs/IM120419006_ITDB02_3.2WD.jpg | ||
− | + | [[File:ITDB02-3.2WD-module.jpg|800px]] | |
+ | |||
Pin Map | Pin Map | ||
Line 132: | Line 141: | ||
==Download== | ==Download== | ||
+ | [ftp://imall.iteadstudio.com/IM120419006_ITDB02_3.2WD/DS_IM120419006_ITDB02_3.2WD.pdf Datasheet for ITDB02-3.2WD] | ||
+ | |||
+ | [ftp://imall.iteadstudio.com/IM120419006_ITDB02_3.2WD/DS_HX8352-A.pdf Datasheet for HX8352-A] | ||
+ | |||
+ | [http://www.rinkydinkelectronics.com/library.php?id=51 UTFT library] | ||
==Useful Links== | ==Useful Links== | ||
+ | [http://www.rinkydinkelectronics.com/library.php?id=51 by Henning Karlsen <UTFT library>] |
Latest revision as of 02:42, 22 July 2015
Contents
Overview
ITDB02-3.2WD module is 3.2" TFT LCD with 65K color 400 x 240 resolutions (16:9 widescreen). The controller of this LCD module is HX8352-A, it supports 16bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket.
ITDB02-3.2WD is supported by UTFT Library
Go shopping ITDB02-3.2WD (IM120419006)
Features
- Compatible with UTFT library
- With SD Card Socket
Specifications
Driver IC | HX8352 |
Backlight | 4LEDs |
Power supply | 5V |
Touch Panel | Y |
Touch IC | XPT2046 |
Resolution | 240*400 |
Size | 95mm*65mm |
Electrical Characteristics
Parameter | Min. | Typical | Max. | Unit |
Power voltage | 4.5 | 5 | 5.5 | VDC |
Input voltage VinH | 3 | 3.3 | 3.6 | V |
Input voltage VinL | -0.3 | 0 | 0.5 | V |
Current Consumption | - | 20 | 40 | mA |
Hardware
Pin Map
Pin | Type* | Description |
GND | G | Ground |
VCC | P | 5V Power Supply pin |
NC | - | No connection |
RS | I | Data/Command selection |
WR | I | Write signal enable, low active |
RD | I | Read signal enable, low active |
DB8 | I | Data Bus |
DB9 | I | Data Bus |
DB10 | I | Data Bus |
DB11 | I | Data Bus |
DB12 | I | Data Bus |
DB13 | I | Data Bus |
DB14 | I | Data Bus |
DB15 | I | Data Bus |
CS | I | Chip Selection,Low level active |
NC | - | No connection |
LED | P | Backlight |
NC | - | No connection |
DB0 | I | Data Bus |
DB1 | I | Data Bus |
DB2 | I | Data Bus |
DB3 | I | Data Bus |
DB4 | I | Data Bus |
DB5 | I | Data Bus |
DB6 | I | Data Bus |
DB7 | I | Data Bus |
T_CLK | I | Touch clock |
T_CS | I | Touch chip selection |
T_DIN | I | Touch data input |
T_BUSY | O | Touch status |
T_DOUT | O | Touch data output |
T_IRQ | O | Touch interrupt |
SD_SO | O | SD MISO |
SD_SCK | I | SD SCK |
SD_SI | I | SD MOSI |
SD_NSS | I | SD NSS |
NC | - | No connection |
NC | - | No connection |