NoticeDifference between revisions of "Tutorial"
From ITEAD Wiki
m (→Raspberry PI Add-on) |
m (→IBOX / Iteaduino Plus) |
||
| Line 8: | Line 8: | ||
* [http://blog.iteadstudio.com/example-of-applying-itead-a20-core-with-rdm8800/ Example Of Applying ITEAD A20 CORE With RDM8800] | * [http://blog.iteadstudio.com/example-of-applying-itead-a20-core-with-rdm8800/ Example Of Applying ITEAD A20 CORE With RDM8800] | ||
* [http://blog.iteadstudio.com/how-to-get-a-fixed-mac-address-on-iteaduino-plus/ How to Get a Fixed MAC Address on Iteaduino Plus] | * [http://blog.iteadstudio.com/how-to-get-a-fixed-mac-address-on-iteaduino-plus/ How to Get a Fixed MAC Address on Iteaduino Plus] | ||
| − | |||
==Raspberry PI Add-on== | ==Raspberry PI Add-on== | ||
Revision as of 05:42, 11 September 2014
IBOX / Iteaduino Plus
- Install OS to SD Card
- Install OS to NAND Flash
- Build Your Own Linux System Step by Step
- Iteaduino Plus Work with OLED And 1602 Dispaly
- Using The ITEAD A20 CORE AS Control Host Of 3D Printer
- Example Of Applying ITEAD A20 CORE With RDM8800
- How to Get a Fixed MAC Address on Iteaduino Plus
Raspberry PI Add-on
- Use Itead SDK to Drive a 1602 LED
- Drive Raspberry Pi 2.8 TFT Add-on
- Raspberry Pi drives ITEAD PN532 NFC module with libnfc
- Raspberry PI 2.8 TFT Add-on V1.1 Touch Function Realizing
