Difference between revisions of "Iteaduino Leonardo"

From ITEAD Wiki
Jump to: navigation, search
(→‎Spec)
m (Links to existing pages added by LinkTitles bot.)
 
(14 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
==Overview==
 
==Overview==
−
Iteaduino Leonardo is a microcontroller board based on the ATmega32u4, it's 100% campatible with Arduino Leonardo. It has 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
 
  
−
Iteaduino Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board.
+
[[File:Iteaduino Leonardo1.jpg|thumb|400px|right]]
 +
[[Iteaduino Leonardo]] is a microcontroller board based on the ATmega32u4, it's 100% campatible with Arduino Leonardo. It has 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
  
 +
[[Iteaduino Leonardo]] differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board.
 +
 +
Go shopping [http://imall.iteadstudio.com/itaeduino-leonardo.html Iteaduino Leonardo (SKU:IM120724001)]
 
==Features==
 
==Features==
 
* Efficient DC-DC Power supply with wide range input.  
 
* Efficient DC-DC Power supply with wide range input.  
Line 10: Line 13:
 
* UART/IIC interface breakout  
 
* UART/IIC interface breakout  
 
* All electronic brick socket are broken out
 
* All electronic brick socket are broken out
−
 
−
==Hardware==
 
−
[[File:Iteaduino Leonardo.jpg]]
 
  
 
==Spec==   
 
==Spec==   
Line 43: Line 43:
 
| Yes
 
| Yes
 
|}
 
|}
 +
 +
==Electrical Characteristics==
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Specification'''
 +
| align="center" style="background:#f0f0f0;"|'''Min'''
 +
| align="center" style="background:#f0f0f0;"|'''Type'''
 +
| align="center" style="background:#f0f0f0;"|'''Max'''
 +
| align="center" style="background:#f0f0f0;"|'''Unit'''
 +
|-
 +
| Input voltage||7||-||23||VDC
 +
|-
 +
| Operating Voltage||-||3.3/5||-||VDC
 +
|-
 +
| DC Current per I/O Pin ||-||40||-||mA
 +
|}
 +
 +
==Hardware==
 +
[[File:Iteaduino Leonardo.jpg]]
 +
 +
Digital/Servo Interface: D0~D13 pin
 +
 +
Sensor Interface: A0 A1 A2 A3 A4 A5 pin
 +
 +
==Pin Map==
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Index'''
 +
| align="center" style="background:#f0f0f0;"|'''Name of Arduino'''
 +
| align="center" style="background:#f0f0f0;"|'''Alternate Function'''
 +
| align="center" style="background:#f0f0f0;"|'''Pin of Atmega32u4'''
 +
|-
 +
| 1||D0||UART DIN||PD2
 +
|-
 +
| 2||D1||UART DOUT||PD3
 +
|-
 +
| 3||D2||IIC_SDA||PD1
 +
|-
 +
| 4||D3||IIC_SCL/PWM||PD0
 +
|-
 +
| 5||D4||External Interrupt 0/A6||PD4
 +
|-
 +
| 6||D5||External Interrupt 1/PWM||PC5
 +
|-
 +
| 7||D6||PWM||PD7
 +
|-
 +
| 8||D7||A7||PE6
 +
|-
 +
| 9||D8||A8||PB4
 +
|-
 +
| 10||D9||PWM/A9||PB5
 +
|-
 +
| 11||D10||PWM/A10||PB6
 +
|-
 +
| 12||D11||PWM||PB7
 +
|-
 +
| 13||D12||A11||PD6
 +
|-
 +
| 14||D13||PWM||PC7
 +
|-
 +
| 15||A0||||PF7
 +
|-
 +
| 16||A1||||PF6
 +
|-
 +
| 17||A2||||PF5
 +
|-
 +
| 18||A3||||PF4
 +
|-
 +
| 19||A4||||PF1
 +
|-
 +
| 20||A5||||PF0
 +
|}
 +
 +
==Power Supply==
 +
The Arduino Leonardo can be powered via the micro USB connection or with an external power supply. The power source is selected automatically.
 +
 +
External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.
 +
 +
The board can operate on an external supply of 7 to 23 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable.
 +
 +
The power pins are as follows:
 +
* '''VIN.''' The input voltage to the Iteaduino board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin.
 +
* '''5V.''' The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via an on-board regulator, or be supplied by USB or another regulated 5V supply.
 +
* '''3V3.''' A 3.3 volt supply generated by the on-board regulator. Maximum current draw is 250 mA.
 +
* '''GND.''' Ground pins.
 +
* '''IOREF.''' The voltage at which the i/o pins of the board are operating (i.e. VCC for the board). This is 5V on the [[Iteaduino Leonardo]].
 +
 +
==Memory==
 +
The ATmega32u4 has 32 KB (with 4 KB used for the bootloader). It also has 2.5 KB of SRAM and 1 KB of EEPROM (which can be read and written with the EEPROM
 +
library).
 +
 +
==Input and Output==
 +
Each of the 20 digital i/o pins on the Uno can be used as an input or output, using pinMode(), digitalWrite(), anddigitalRead() functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up
 +
resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:
 +
 +
* '''Serial: 0 (RX) and 1 (TX).''' Used to receive (RX) and transmit (TX) TTL serial data using the ATmega32U4hardware serial capability. Note that on the Leonardo, the '''Serial''' class refers to USB (CDC) communication; for TTL serial on pins 0 and 1, use the '''Serial1''' class.
 +
* '''TWI: 2 (SDA) and 3 (SCL).''' Support TWI communication using the [http://arduino.cc/en/Reference/Wire Wire library].
 +
* '''External Interrupts: 2 and 3.''' These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See
 +
the attachInterrupt() function for details.
 +
* '''PWM: 3, 5, 6, 9, 10, 11, and 13.''' Provide 8-bit PWM output with the analogWrite() function.
 +
* '''SPI: on the ICSP header.''' These pins support SPI communication using the SPI library. Note that the SPI pins are not connected to any of the digital I/O pins as they are on the Uno, They are only available on the ICSP connector. This means that if you have a [[shield]] that uses SPI, but does NOT have a 6-pin ICSP connector that connects to the Leonardo's 6-pin ICSP header, the [[shield]] will not work.
 +
* '''LED: 13.''' There is a built-in LED connected to digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it's off.
 +
* '''Analog Inputs: A0-A5, A6 - A11 (on digital pins 4, 6, 8, 9, 10, and 12).''' The Leonardo has 12 analog inputs, labeled A0 through A11, all of which can also be used as digital i/o. Pins A0-A5 appear in the same locations as on the Uno; inputs A6-A11 are on digital i/o pins 4, 6, 8, 9, 10, and 12 respectively. Each analog input provides 10 bits of resolution (i.e. 1024 different values). By default the analog inputs measure from ground to 5 volts, though is it possible to change the upper end of their range using the AREF pin and the analogReference() function.
 +
 +
There are a couple of other pins on the board:
 +
* '''AREF.''' Reference voltage for the analog inputs. Used with analogReference().
 +
* '''Reset.''' Bring this line LOW to reset the microcontroller. Typically used to add a reset button to shields which block the one on the board.
 +
 +
==Communication==
 +
The [[Iteaduino Leonardo]] has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The ATmega32U4 provides UART TTL (5/3.3V) serial communication, which is available on digital pins 0 (RX) and 1 (TX). The 32U4 also allows for serial (CDC) communication over USB and appears as a virtual com port to software on the computer. The chip also acts as a full speed USB 2.0 device, using standard USB COM drivers. On Windows, a .inf file
 +
is required. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TX LEDs on the
 +
board will flash when data is being transmitted via the USB connection to the computer (but not for serial communication on pins 0 and 1).
 +
 +
A Software Serial library allows for serial communication on any of the [[Iteaduino Leonardo]]'s digital pins.
 +
 +
The ATmega32U4 also supports I2C (TWI) and SPI communication. The Arduino software includes a Wire library to simplify use of the I2C bus. For SPI communication, use the SPI library.
 +
 +
The [[Iteaduino Leonardo]] appears as a generic keyboard and mouse, and can be programmed to control these input devices using the Keyboard and Mouse classes.
 +
 +
==Programming==
 +
The [[Iteaduino Leonardo]] can be programmed with the Arduino software . Select "Arduino Leonardo from the '''Tools > Board''' menu (according to the microcontroller
 +
on your board).
 +
 +
The ATmega32U4 on the [[Iteaduino Leonardo]] comes pre-burned with a bootloader that allows you to upload new code to it without the use of an external
 +
hardware programmer. It communicates using the AVR109 protocol. You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header.
 +
 +
==Automatic (Software) Reset and Bootloader==
 +
 +
===Initiation===
 +
Rather than requiring a physical press of the reset button before an upload, the [[Iteaduino Leonardo]] is designed in a way that allows it to be reset by software
 +
running on a connected computer. The reset is triggered when the Leonardo's virtual (CDC) serial / COM port is opened at 1200 baud and then closed. When this
 +
happens, the processor will reset, breaking the USB connection to the computer (meaning that the virtual serial / COM port will disappear). After the processor
 +
resets, the bootloader starts, remaining active for about 8 seconds. The bootloader can also be initiated by pressing the reset button on the Leonardo. Note that when the board first powers up, it will jump straight to the user sketch, if present, rather than initiating the bootloader.
 +
 +
Because of the way the [[Iteaduino Leonardo]] handles reset it's best to let the Arduino software try to initiate the reset before uploading, especially if you are in the habit of pressing the reset button before uploading on other boards. If the software can't reset the board you can always start the bootloader by pressing the reset button on the board.
 +
 +
===USB Over-current Protection===
 +
The [[Iteaduino Leonardo]] has a PTC that protects your computer's USB ports from shorts and over-current. Although most computers provide their own internal
 +
protection, the fuse provides an extra layer of protection. If more than 500 mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.
 +
 +
===Physical Characteristics===
 +
The maximum length and width of the Leonardo PCB are 68.58 and 58.42 millimeter respectively, with the USB connector and power jack extending beyond the former
 +
dimension. Three screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.
  
 
==Download==
 
==Download==

Latest revision as of 10:16, 15 June 2014

Overview

Iteaduino Leonardo1.jpg

Iteaduino Leonardo is a microcontroller board based on the ATmega32u4, it's 100% campatible with Arduino Leonardo. It has 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Iteaduino Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board.

Go shopping Iteaduino Leonardo (SKU:IM120724001)

Features

  • Efficient DC-DC Power supply with wide range input.
  • 3.3V/5V Operating Voltage selection
  • All pins out for Sensor and Servo
  • UART/IIC interface breakout
  • All electronic brick socket are broken out

Spec

Microprocessor ATmega32U4
PCB Size 68.58mm X 58.42mm X 1.6mm
Indicators Power,TX,RX,L
Power supply(recommended) 7-23V DC
Power supply(limits) 23 VDC(max)
Communication Protocol UART,SPI,IIC
Clock Speed 16MHz
RoHS Yes

Electrical Characteristics

Specification Min Type Max Unit
Input voltage 7 - 23 VDC
Operating Voltage - 3.3/5 - VDC
DC Current per I/O Pin - 40 - mA

Hardware

Iteaduino Leonardo.jpg

Digital/Servo Interface: D0~D13 pin

Sensor Interface: A0 A1 A2 A3 A4 A5 pin

Pin Map

Index Name of Arduino Alternate Function Pin of Atmega32u4
1 D0 UART DIN PD2
2 D1 UART DOUT PD3
3 D2 IIC_SDA PD1
4 D3 IIC_SCL/PWM PD0
5 D4 External Interrupt 0/A6 PD4
6 D5 External Interrupt 1/PWM PC5
7 D6 PWM PD7
8 D7 A7 PE6
9 D8 A8 PB4
10 D9 PWM/A9 PB5
11 D10 PWM/A10 PB6
12 D11 PWM PB7
13 D12 A11 PD6
14 D13 PWM PC7
15 A0 PF7
16 A1 PF6
17 A2 PF5
18 A3 PF4
19 A4 PF1
20 A5 PF0

Power Supply

The Arduino Leonardo can be powered via the micro USB connection or with an external power supply. The power source is selected automatically.

External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.

The board can operate on an external supply of 7 to 23 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable.

The power pins are as follows:

  • VIN. The input voltage to the Iteaduino board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin.
  • 5V. The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via an on-board regulator, or be supplied by USB or another regulated 5V supply.
  • 3V3. A 3.3 volt supply generated by the on-board regulator. Maximum current draw is 250 mA.
  • GND. Ground pins.
  • IOREF. The voltage at which the i/o pins of the board are operating (i.e. VCC for the board). This is 5V on the Iteaduino Leonardo.

Memory

The ATmega32u4 has 32 KB (with 4 KB used for the bootloader). It also has 2.5 KB of SRAM and 1 KB of EEPROM (which can be read and written with the EEPROM library).

Input and Output

Each of the 20 digital i/o pins on the Uno can be used as an input or output, using pinMode(), digitalWrite(), anddigitalRead() functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:

  • Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data using the ATmega32U4hardware serial capability. Note that on the Leonardo, the Serial class refers to USB (CDC) communication; for TTL serial on pins 0 and 1, use the Serial1 class.
  • TWI: 2 (SDA) and 3 (SCL). Support TWI communication using the Wire library.
  • External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See

the attachInterrupt() function for details.

  • PWM: 3, 5, 6, 9, 10, 11, and 13. Provide 8-bit PWM output with the analogWrite() function.
  • SPI: on the ICSP header. These pins support SPI communication using the SPI library. Note that the SPI pins are not connected to any of the digital I/O pins as they are on the Uno, They are only available on the ICSP connector. This means that if you have a shield that uses SPI, but does NOT have a 6-pin ICSP connector that connects to the Leonardo's 6-pin ICSP header, the shield will not work.
  • LED: 13. There is a built-in LED connected to digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it's off.
  • Analog Inputs: A0-A5, A6 - A11 (on digital pins 4, 6, 8, 9, 10, and 12). The Leonardo has 12 analog inputs, labeled A0 through A11, all of which can also be used as digital i/o. Pins A0-A5 appear in the same locations as on the Uno; inputs A6-A11 are on digital i/o pins 4, 6, 8, 9, 10, and 12 respectively. Each analog input provides 10 bits of resolution (i.e. 1024 different values). By default the analog inputs measure from ground to 5 volts, though is it possible to change the upper end of their range using the AREF pin and the analogReference() function.

There are a couple of other pins on the board:

  • AREF. Reference voltage for the analog inputs. Used with analogReference().
  • Reset. Bring this line LOW to reset the microcontroller. Typically used to add a reset button to shields which block the one on the board.

Communication

The Iteaduino Leonardo has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The ATmega32U4 provides UART TTL (5/3.3V) serial communication, which is available on digital pins 0 (RX) and 1 (TX). The 32U4 also allows for serial (CDC) communication over USB and appears as a virtual com port to software on the computer. The chip also acts as a full speed USB 2.0 device, using standard USB COM drivers. On Windows, a .inf file is required. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TX LEDs on the board will flash when data is being transmitted via the USB connection to the computer (but not for serial communication on pins 0 and 1).

A Software Serial library allows for serial communication on any of the Iteaduino Leonardo's digital pins.

The ATmega32U4 also supports I2C (TWI) and SPI communication. The Arduino software includes a Wire library to simplify use of the I2C bus. For SPI communication, use the SPI library.

The Iteaduino Leonardo appears as a generic keyboard and mouse, and can be programmed to control these input devices using the Keyboard and Mouse classes.

Programming

The Iteaduino Leonardo can be programmed with the Arduino software . Select "Arduino Leonardo from the Tools > Board menu (according to the microcontroller on your board).

The ATmega32U4 on the Iteaduino Leonardo comes pre-burned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the AVR109 protocol. You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header.

Automatic (Software) Reset and Bootloader

Initiation

Rather than requiring a physical press of the reset button before an upload, the Iteaduino Leonardo is designed in a way that allows it to be reset by software running on a connected computer. The reset is triggered when the Leonardo's virtual (CDC) serial / COM port is opened at 1200 baud and then closed. When this happens, the processor will reset, breaking the USB connection to the computer (meaning that the virtual serial / COM port will disappear). After the processor resets, the bootloader starts, remaining active for about 8 seconds. The bootloader can also be initiated by pressing the reset button on the Leonardo. Note that when the board first powers up, it will jump straight to the user sketch, if present, rather than initiating the bootloader.

Because of the way the Iteaduino Leonardo handles reset it's best to let the Arduino software try to initiate the reset before uploading, especially if you are in the habit of pressing the reset button before uploading on other boards. If the software can't reset the board you can always start the bootloader by pressing the reset button on the board.

USB Over-current Protection

The Iteaduino Leonardo has a PTC that protects your computer's USB ports from shorts and over-current. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. If more than 500 mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.

Physical Characteristics

The maximum length and width of the Leonardo PCB are 68.58 and 58.42 millimeter respectively, with the USB connector and power jack extending beyond the former dimension. Three screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.

Download

Datasheet for Iteaduino Leonardo

Schematic for Iteaduino Leonardo

Fritzing Parts for Iteaduino Leonardo

Useful Link

<Fritzing Parts: ITEAD Development Board>

Retrieved from "https://wiki.iteadstudio.com/index.php?title=Iteaduino_Leonardo&oldid=1810"