Difference between revisions of "Breadboard Power Supply Module"

From ITEAD Wiki
Jump to: navigation, search
(Created page with "==Overview== right This is a power module for the standard bread board. Its concave design will not waste your proto z...")
 
(Overview)
 
Line 5: Line 5:
  
 
With this board, you can send power to both power lane of the breadboard, and each side has an on/off switch.
 
With this board, you can send power to both power lane of the breadboard, and each side has an on/off switch.
 +
 +
Go shopping [http://imall.iteadstudio.com/im120525004.html Breadboard Power Supply Module (IM120525004)]
  
 
==Features==
 
==Features==

Latest revision as of 08:29, 11 June 2014

Overview

BREADBOARD POWER SUPPLY MODULE.jpg

This is a power module for the standard bread board. Its concave design will not waste your proto zone. This breadboard power shield supports Mini USB power supply and power jack 7-12V supply. There are two independent power optional: 5V/3.3V. With this board, you can send power to both power lane of the breadboard, and each side has an on/off switch.

With this board, you can send power to both power lane of the breadboard, and each side has an on/off switch.

Go shopping Breadboard Power Supply Module (IM120525004)

Features

  • 3.3v / 5v power supply optional
  • On/Off switch for each bus strips of breadboard
  • Mini USB or Exteral power supply oprional

Download

Schematic

Useful Links