NoticeDifference between revisions of "ITEAD Power Shield"
(→Indicator LED) |
(→Overview) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
Arduino pin map makes it compatible with Iteaduino series and other | Arduino pin map makes it compatible with Iteaduino series and other | ||
Arduino compatible board. | Arduino compatible board. | ||
| + | |||
| + | Go shopping [http://imall.iteadstudio.com/im121115001.html ITEAD Power Shield (IM121115001)] | ||
==Features== | ==Features== | ||
| Line 58: | Line 60: | ||
==Download== | ==Download== | ||
| + | [ftp://imall.iteadstudio.com/Shield/IM121115001/DS_IM121115001_Powershield.pdf Datasheet for ITEAD Power Shield] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/Shield/IM121115001/SCH_IM121115001_Powershield.pdf Schematic for ITEAD Power Shield] | ||
==Useful Links== | ==Useful Links== | ||
Latest revision as of 06:21, 11 June 2014
Contents
Overview
Power Shield is a portable offline power supply board for Arduino. Using two AAA batteries and with high-efficiency DC-DC boost circuit, this shield is the power source which can output 5V/350mA. Standard Arduino pin map makes it compatible with Iteaduino series and other Arduino compatible board.
Go shopping ITEAD Power Shield (IM121115001)
Features
- Up to 90% high-efficiency boost circuit
- 5V/350mA output
- Power supply for external USB device with cable
- Operation temperature: 0℃ ~ +60℃
Specifications
| PCB size | 55.88mm X 68.58mm X 1.6mm |
| Indicators | Work |
| Power supply | 5V |
| RoSH | Yes |
Electrical Characteristics
| Specification | Min | Type | Max | Unit |
| Output Voltage | 4.9V | - | 5.1 | VDC |
| Output Current * | - | - | 350 | mA |
NOTE: The Output Max current is depended on the batteries power supply.
Hardware
Installation
Two AAA batteries can be installed on Power shield. When the switch is set to ON, this shield can output the 5V voltage, and when the switch is set to OFF, the output is cut down.
On this shield, there is a standard USB A socket which can supply a 5V/350mA for external USB device.
Indicator LED
The shield contains a LED:
- PWR: indicates the voltage output.
Download
Datasheet for ITEAD Power Shield
Schematic for ITEAD Power Shield
