NoticeDifference between revisions of "CH375B USB Bus General Interface Module"
From ITEAD Wiki
(Created page with "==Overview== right CH375B is a USB bus general interface chip with 8-bit data bus and control lines for reading, writing and chip selection and...") |
(→Download) |
||
| Line 14: | Line 14: | ||
==Download== | ==Download== | ||
| + | [ftp://imall.iteadstudio.com/Modules/IM131009001/DS_IM131009001.pdf Datasheet] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/Modules/IM131009001/SCH_IM131009001.pdf Schematic] | ||
==Useful Links== | ==Useful Links== | ||
Revision as of 06:13, 29 May 2014
Overview
CH375B is a USB bus general interface chip with 8-bit data bus and control lines for reading, writing and chip selection and output interruption, which can be easily attached to the system bus of controllers such as MCU / DSP / MPU. In USB host mode, CH375B also provides serial communication, which can be connected to MCU / DSP / MPU, etc. via serial input, serial output, and interrupt output.
Connector
- 2x8 connector, can be easily hooked to MCU
Parameters
- Can be operated in parallel or serial mode according to the jumper
- USB status indicator
- Onboard 3.3V LDO 1117, providing current up to 800mA
- 5V power supply from the target board
- 12MHZ crystal
