NoticeDifference between revisions of "Serial Port Bluetooth Module (Master/Slave) : HC-05"
From ITEAD Wiki
(→Overview) |
(→Hardware Features) |
||
| Line 13: | Line 13: | ||
===Hardware Features=== | ===Hardware Features=== | ||
| + | * Typical -80dBm sensitivity | ||
| + | * Up to +4dBm RF transmit power | ||
| + | * Low Power 1.8V Operation ,1.8 to 3.6V I/O | ||
| + | * PIO control | ||
| + | * UART interface with programmable baud rate | ||
| + | * With integrated antenna | ||
| + | * With edge connector | ||
===Software Features=== | ===Software Features=== | ||
Revision as of 09:04, 28 May 2014
Contents
Overview
HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.
Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle.
Specifications
Hardware Features
- Typical -80dBm sensitivity
- Up to +4dBm RF transmit power
- Low Power 1.8V Operation ,1.8 to 3.6V I/O
- PIO control
- UART interface with programmable baud rate
- With integrated antenna
- With edge connector
