NoticeDifference between revisions of "Wireless Charging Module"
From ITEAD Wiki
(Created page with "==Overview== right The Wireless Charging Module can be applied in electronic equipments in common use for close wireless char...") |
(→Features) |
||
| Line 8: | Line 8: | ||
* Space-saving design | * Space-saving design | ||
| − | Specifications | + | ==Specifications== |
| + | {| border="1" | ||
| − | Input Voltage | + | | Input Voltage||12Vdc |
| − | Input Voltage(limits) | + | |- |
| − | Output Voltage | + | | Input Voltage(limits)||13.5Vdc |
| − | Output Current(maximum) | + | |- |
| − | Transmitter Coil Inductance | + | | Output Voltage||5/9/12Vdc |
| − | Transmit-receive distance | + | |- |
| − | Transmitter | + | | Output Current(maximum)||600mA |
| − | Receiver | + | |- |
| − | Coil Diameter | + | | Transmitter Coil Inductance||30uH |
| + | |- | ||
| + | | Transmit-receive distance||1-20mm | ||
| + | |- | ||
| + | | Transmitter ||17*12*4mm | ||
| + | |- | ||
| + | | Receiver||24*10*3mm | ||
| + | |- | ||
| + | | Coil Diameter||38mm | ||
| + | |- | ||
| + | | Coil Height||2mm | ||
| + | |} | ||
==Demo== | ==Demo== | ||
==Download== | ==Download== | ||
Revision as of 08:27, 28 May 2014
Contents
Overview
The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insulation coil, it could serve as a replacement for the Wireless Power Supply with stable 5/9/12V output voltage and maximum 600mA output current. Its small size and insulation coil is more suitable for using in wireless project.
Features
- Stable power supply
- Insulation Coil
- Space-saving design
Specifications
| Input Voltage | 12Vdc |
| Input Voltage(limits) | 13.5Vdc |
| Output Voltage | 5/9/12Vdc |
| Output Current(maximum) | 600mA |
| Transmitter Coil Inductance | 30uH |
| Transmit-receive distance | 1-20mm |
| Transmitter | 17*12*4mm |
| Receiver | 24*10*3mm |
| Coil Diameter | 38mm |
| Coil Height | 2mm |
