NoticeDifference between revisions of "Sound Sensor/Microphone Brick"
From ITEAD Wiki
(→Features) |
(→Specifications) |
||
| Line 12: | Line 12: | ||
==Specifications== | ==Specifications== | ||
| + | {| border="1" | ||
| + | |||
| + | | PCB Size||33.0mm X 14.0mm X 1.6mm | ||
| + | |- | ||
| + | | Working voltage||5V DC | ||
| + | |- | ||
| + | | Operating voltage||5V DC | ||
| + | |- | ||
| + | | Compatible interfaces||2.54 3-pin interface and 4-pin Grove interface(1) | ||
| + | |} | ||
| + | |||
| + | ''Note 1: S for digital output port , V and G for voltage at the common collector and ground respectively.'' | ||
==Electrical Characteristics== | ==Electrical Characteristics== | ||
Revision as of 02:40, 27 May 2014
Contents
Overview
Electronic brick of microphone can be connected to the analog I / O port, when speaking to the microphone, the analog value will be changed. A recorder can be made by reading and saving the analog value.
Features
1. Plug and Play, easy to use.Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.
2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock
Specifications
| PCB Size | 33.0mm X 14.0mm X 1.6mm |
| Working voltage | 5V DC |
| Operating voltage | 5V DC |
| Compatible interfaces | 2.54 3-pin interface and 4-pin Grove interface(1) |
Note 1: S for digital output port , V and G for voltage at the common collector and ground respectively.
