View source for RASPBERRY PI Arduino Shield ADD-ON/en

==Overview==
[[File:IM140714004_3.jpg|thumb|400px|right]]
Compared to Arduino, it's hard to find the shields and electronic brick customized for Raspberry Pi. This Arduino [[Shield]] Add-on has extended RPI 32PIN Connector to Arduino PIN, which will facilitate connections to all kinds of arduino shields. Meanwhile, two groups of electronic brick interfaces are equipped on the add-on, which are free to be connected to various electronic bricks.

We do not only offer this convenient add-on for Raspberry Pi, but also provide an SDK that help you transplant divers of Arduino into Raspberry Pi. After installing the SDK, you can drive this add-on as easily as you do on Arduino.

==Features==
**extend RPI 32pin connector to Arduino [[Shield]]
*two groups of Grove electronic brick interfaces
*two electronic brick intefaces
*two optional voltage levels 3V3/5V

==Specification==
{| border="1"
| PCB Size||62.33X49.67X1.6mm
|-
| Interface||IIC, UART, Arduino [[Shield]]
|-
|}

==Electrical Characteristics==
{| class="wikitable"
| align="center" style="background:#f0f0f0;"|'''Characteristics'''
| align="center" style="background:#f0f0f0;"|'''Symbol'''
| align="center" style="background:#f0f0f0;"|'''Min'''
| align="center" style="background:#f0f0f0;"|'''Typ'''
| align="center" style="background:#f0f0f0;"|'''Max'''
| align="center" style="background:#f0f0f0;"|'''Unit'''
|-
| Power supply voltage||VDD||3||3.3||3.5||V
|-
|}

==Hardware==

[[File:IM140714004pic1.jpg|500px]]
[[File:IM140714004pic2.jpg|500px]]
[[File:IM140714004pic3.jpg|500px]]

==Pin Map==
{| class="wikitable"
| align="center" style="background:#f0f0f0;"|'''Pin Index'''
| align="center" style="background:#f0f0f0;"|'''Pin Name'''
| align="center" style="background:#f0f0f0;"|'''Arduino [[Shield]]'''
| align="center" style="background:#f0f0f0;"|'''Description'''
|-
| 1||3V3||-||
|-
| 2||5V||-||
|-
| 3||SDA||A4||UART SDA
|-
| 4||5V||-||
|-
| 5||SCL||A5||UART SCL
|-
| 6||GND||-||
|-
| 7||GPIO7||D9||UART TXD
|-
| 8||TXD||D1||
|-
| 9||GND||-||
|-
| 10||RXD||D0||UART RXD
|-
| 11||GPIO0||D2||
|-
| 12||GPIO1||D3||
|-
| 13||GPIO2||D4||
|-
| 14||GND||-||
|-
| 15||GPIO3||D5||
|-
| 16||GPIO4||D6||
|-
| 17||3V3||-||
|-
| 18||GPIO5||D7||
|-
| 19||MOSI||D11||
|-
| 20||GND||-||
|-
| 21||MISO||D12||
|-
| 22||GPIO6||D8||
|-
| 23||SCK||D13||
|-
| 24||CE0||D10||
|-
| 25||GND||-||
|-
| 26||CE1||A3||
|-
|}

==Instruction==
*Plug Rpi Arduino [[Shield]] Add-on into RPI V2, connect SHT10 to IIC interface through 4-pin wires. Power Raspberry Pi V2.
*[[Download]] the SDK from this link: https://github.com/iteadsw/SDK and then install it.
*Modify the file ReadSHT1xValues.ino
: modified codes as below:
::define dataPin 3
::define clockPin 5
*Enter into the directory '''libraries/itead_SHT1x/examples/ReadSHT1xValues''', compile and run the file '''ReadSHT1xValues.ino'''
:Command as below to compile ReadSHT1xValues.ino
::$ iteadcompile ReadSHT1xValues ReadSHT1xValues.ino
:Command to run this program
::$ sudo ./ ReadSHT1xValues
*When the compilation is done, you can read the temperature and humidity data from the terminal.

[[File:IM140714004in1.jpg|400px]]
[[File:IM140714004in2.jpg|500px]]

==Download==
[[File:SHC_IM140714004.pdf]]

==Useful Link==
https://github.com/iteadsw/SDK