Difference between revisions of "ITDB02-3.2S"

From ITEAD Wiki
Jump to: navigation, search
m (Features)
m (Electrical Characteristics)
Line 43: Line 43:
 
|-
 
|-
 
| Input voltage VinH (Target Voltage = 3.3V)||3||3.3||3.6||V
 
| Input voltage VinH (Target Voltage = 3.3V)||3||3.3||3.6||V
|-
 
| Input voltage VinH (Target Voltage = 5V)||4.5||5||5.5||V
 
 
|-
 
|-
 
| Input voltage VinL||-0.3||0||0.5||V
 
| Input voltage VinL||-0.3||0||0.5||V

Revision as of 02:41, 22 July 2015

Overview

ITDB02-3.2S.jpg

ITDB02-3.2S module is 3.2" TFT LCD with 65K color 320 x 240 resolutions. The controller of this LCD module is SSD1289, it supports 16bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket.

ITDB02-3.2S is supported by UTFT Library.

Go shopping ITDB02-3.2S (IM120419005)

Features

  • Compatible with UTFT library
  • With SD Card Socket

Specifications

Driver IC SSD1289
Backlight 5LEDs
Power supply 3.3V
Touch Panel Y
Touch IC XPT2046
Resolution 240*320
Size 84mm*57mm

Electrical Characteristics

Parameter Min. Typical Max. Unit
Power voltage 4.5 5 5.5 VDC
Input voltage VinH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input voltage VinL -0.3 0 0.5 V
Current Consumption - 20 40 mA

Hardware

IM120419005_ITDB02_3.2S.jpg ITDB02-3.2-parallel.jpg

Bottom View

Pin Map

Pin Type* Description
GND G Ground
VCC P 5V Power Supply pin
NC - No connection
RS I Data/Command selection
WR I Write signal enable, low active
RD I Read signal enable, low active
DB8 I Data Bus
DB9 I Data Bus
DB10 I Data Bus
DB11 I Data Bus
DB12 I Data Bus
DB13 I Data Bus
DB14 I Data Bus
DB15 I Data Bus
CS I Chip Selection,Low level active
NC - No connection
LED P Backlight
NC - No connection
DB0 I Data Bus
DB1 I Data Bus
DB2 I Data Bus
DB3 I Data Bus
DB4 I Data Bus
DB5 I Data Bus
DB6 I Data Bus
DB7 I Data Bus
T_CLK I Touch clock
T_CS I Touch chip selection
T_DIN I Touch data input
T_BUSY O Touch status
T_DOUT O Touch data output
T_IRQ O Touch interrupt
SD_SO O SD MISO
SD_SCK I SD SCK
SD_SI I SD MOSI
SD_NSS I SD NSS
NC - No connection
NC - No connection

Type*:P: Power supply; G:Ground; I:Input; O:Output; The ITDB02_3.2 uses the SSD1289 controller , it support 16bit data interface. The touch IC is TSC2046.

Download

Datasheet for ITDB02_3.2S

Datasheet for SSD1289

Schematic

Demo code

UTFT library

Useful Links

by Henning Kalsen <UTFT Library>